Treatment rooms, hammams, saunas and day-spa interiors coordinated around drainage, waterproofing, ventilation and authority requirements.
The short answer
A spa fit-out in Dubai typically costs AED 500–700 per sq ft for a dry treatment spa, AED 700–1,000 per sq ft for a premium day spa, and AED 1,000–1,400+ per sq ft for a luxury wet spa — usually delivered in 6–14 weeks after approvals.
AED 500 – 1,400+ / sq ft
We design and build day spas, hotel spas and specialist wellness spaces across Dubai. Planning begins with the operating model and treatment menu, not the finishes: guest arrival, consultation, clean and used-linen routes, staff circulation, accessible changing, room privacy, wet facilities and equipment connections are resolved before the layout is frozen. Wet zones add risks that a generic retail fit-out does not carry. Floor falls, trapped drainage, hot-water recovery, waterproofing terminations, humidity extraction, corrosion-resistant materials and acoustic separation are coordinated with the available slab and ceiling zones. Sauna, steam, hammam and hydrotherapy equipment are scheduled by model so power, drainage, ventilation and maintenance clearances are not guessed on site. The fixed BOQ separates base-build interfaces, waterproofing systems, MEP loads, specialist equipment connections, interior finishes, testing and approval responsibilities. It also records landlord works, client-supplied equipment, authority fees and exclusions. This lets an operator compare proposals on the same technical scope and understand what is required for an operational handover before committing to construction.
Move the slider, pick your finish, see the range instantly — then turn it into a fixed, itemized quote in 24 hours.
Estimated range
AED 1,260,000 – AED 1,800,000
Planning range only. Specialist equipment is itemized separately.
BEFORESpa fit-out — Dubai — drag to reveal
Representative project
Representative scope and planning allowance. Confirm the matching project record, inclusions and current material allowances during consultation.
Dry Treatment Spa
AED 500 – 700 / sq ft
Treatment rooms, reception, joinery, lighting and acoustics
Premium Day Spa
AED 700 – 1,000 / sq ft
Showers, changing facilities, enhanced MEP and premium finishes
Luxury Wet Spa
AED 1,000 – 1,400+ / sq ft
Hammam, sauna, steam or hydrotherapy infrastructure
Prices are estimates. Get an exact, itemized quote with a free site visit.
Wellness sector scope
A spa fit-out is more services-intensive than a dry beauty salon. Treatment-room privacy, acoustic separation, wet-area drainage, waterproofing, hot-water demand, humidity control and equipment loads must be coordinated before ceilings and finishes close the space.
| Spa format | Planning range | Key scope |
|---|---|---|
| Dry treatment spa | AED 500–700 / sq ft | Treatment rooms, reception, joinery, lighting and acoustics |
| Premium day spa | AED 700–1,000 / sq ft | Showers, changing areas, enhanced HVAC and wet services |
| Luxury wet spa | AED 1,000–1,400+ / sq ft | Steam, sauna, hammam or hydrotherapy infrastructure |
The range excludes specialist spa equipment unless it is scheduled in the BOQ. Final cost depends on the leased unit, treatment menu, wet facilities and authority route.
Estimate salon or spa fit-out cost →Across the UAE, the lowest quote is rarely the final bill. We define the scope and put changes in writing.
A dry treatment spa typically plans at AED 500–700 per sq ft, a premium day spa at AED 700–1,000 per sq ft, and a luxury wet spa at AED 1,000–1,400+ per sq ft. The leased unit, wet facilities and specialist equipment determine the final BOQ.
It should identify enabling works, wet-area build-up, waterproofing, drainage, hot-water demand, ventilation, acoustic separation, equipment power and plumbing points, ceilings, lighting, joinery, finishes, testing and approval responsibilities.
A dry treatment spa can take 6–10 weeks after approvals. Wet spas with hammams, steam rooms or specialist systems commonly take 10–14 weeks, subject to the unit condition and equipment lead times.
The route depends on the premises and treatment menu. It can include landlord or developer approval, Dubai Municipality, Civil Defence and health-authority requirements for regulated services. The matrix should be confirmed before construction.
Spa rooms can have higher humidity, heat and privacy requirements. Fresh air, extraction, temperature control and pressure relationships must be coordinated with wet services and ceiling space before finishes are installed.
Equipment is included only when it is scheduled in the signed BOQ. The quotation identifies supply items separately from builders' work, MEP connections and installation interfaces.
The designer needs the leased-unit drawings, landlord manual, treatment menu, expected guest capacity, staffing model, equipment schedule and wet-facility brief. These determine room count, circulation, privacy, hot-water demand, drainage, electrical loads, ventilation and the approval matrix.
Clean storage and used-linen collection should be separated from guest-facing routes wherever the unit permits. The layout must give staff a practical service path without moving waste or used linen through reception and relaxation areas.
The handover should include testing of drainage falls, waterproofing records, hot water, ventilation and humidity control, equipment connections, emergency systems, lighting controls and accessible facilities, plus closed snagging and the applicable landlord or authority completion documents.
Free site visit + a fully itemized fixed quote + 3-Year Warranty. No hidden costs, no scope creep.